Bunn ULTRA-2 PAF Manual De Usuario

1. Open the Cabinet Door and

allow the support arms to lock

in place.

THOROUGH CLEANING OF THE PAF HOPPER (Once a week)

2. Slide the gate shut on the

powder hopper and remove the

hopper. Remove the Cover and

empty the contents.

3. Pull the Ejector Elbow off the

Hopper Base. Remove the Slide

Gate from the Ejector Elbow.

4. Remove the Wiper Blade and

Drive Gear by removing the

Retaining Ring from the Wiper

Blade Shaft. Remove Auger by

pulling it out the front of Hop-

per Base.

5. Remove the Auger Drive Shaft

by turning the screw of the Au-

ger Drive Bracket in a clockwise

direction.

6. Wash all components in a mild

solution of dish detergent using

a bristle brush when needed.

Rinse and dry each item thor-

oughly before reassembling.

NOTE: Parts must be thoroughly

dry before adding powder to the

hopper.

43553 071410