Crane Merchandising Systems 677 Manual De Usuario
HDC II Programming Guide
Messages
July, 2003
48
6730018
SELECT A STANDBY MESSAGE
Messages
1.
Press
, then press
until the display shows
STANDBY XX.
"XX" represents the current message number selected for the standby mes-
sage. Two dashes mean that the factory-set message is selected.
sage. Two dashes mean that the factory-set message is selected.
2.
To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
display the factory-set message, press 0.
3.
The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
4.
CONTINUE.
SELECT AN OUT-OF-SERVICE MESSAGE
1.
Press
, then press
until the display shows
SERVICE XX.
"XX" represents the current message number selected to display when the
machine is out-of-service. Two dashes mean that the factory-set message is
selected.
machine is out-of-service. Two dashes mean that the factory-set message is
selected.
2.
To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
display the factory-set message, press 0.
3.
The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
4.
CONTINUE.
SELECT A FREEVEND MESSAGE
1.
Press
, then press
until the display shows
FREE XX. "XX"
represents the current message number selected for the message that dis-
plays when the machine is in the freevend mode. Two dashes mean that the
factory-set message is selected.
plays when the machine is in the freevend mode. Two dashes mean that the
factory-set message is selected.
2.
To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
display the factory-set message, press 0.
3.
The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49
4.
CONTINUE.