Thermador Dishwasher Manual De Usuario
A regular inspection and maintenance of your machine will help to prevent
faults. This saves time and prevents problems.
faults. This saves time and prevents problems.
Overall condition of the machine
Check spray arm for grease and limescale deposits.
Check spray arm for grease and limescale deposits.
If you ind such deposits:
Fill detergent dispenser with detergent.
•
Start the appliance without utensils in the program with the highest
•
rinsing temperature.
Clean the appliance with detergents/appliance cleaners which are
particularly suitable for use with dishwashers.
particularly suitable for use with dishwashers.
Regularly clean door seal with a damp cloth.
•
Never use a steam cleaner to clean your dishwasher. The manufacturer
is not liable for any consequential damage.
is not liable for any consequential damage.
Regularly wipe the front of the appliance and fascia with a damp cloth;
water and a little washing up liquid are adequate.
Do not use sponges with a rough surface or abrasive detergents, as
these could scratch the surfaces.
water and a little washing up liquid are adequate.
Do not use sponges with a rough surface or abrasive detergents, as
these could scratch the surfaces.
Stainless steel appliances: To prevent corrosion, avoid using sponge
cloths or wash them out thoroughly several times before using for the
cloths or wash them out thoroughly several times before using for the
irst time.
Maintenance and Care
17
Interior Light * (select models)
The interior light comes on when the door is opened regardless of whether
the unit is powered ON or OFF. When the door is closed or ajar, the light
is off.
The interior light comes on when the door is opened regardless of whether
the unit is powered ON or OFF. When the door is closed or ajar, the light
is off.
Open the door.(for hidden controls only)
•
Switch on ON/OFF switch.
•
Hold down programme button [A] and press START button until H:0 is
•
indicated on the digital display.
Release both buttons.
Release both buttons.
•
The LED for button [A] lashes and the digital display displays the
•
factory setting H:04.
Press programme button [A] until the factory set value E:01 is indicated
•
on the digital display.
To change the setting,
Press the button [C] to switch the interior light off E:00 or on E:01.
•
Press START button .
•
The set value is saved.
The set value is saved.
Close the door.(for hidden controls only)
•