Siemens SL8A5A7 Manual De Usuario

Loading the Bottom Rack

Place large items in the bottom rack. Load pots, pans and bowls upside-down. Figures 3 
and 4 show typical mixed loads for the bottom rack. 

Rack Accessories

Flip Tines fold down to make loading the racks easier in some instances. Grasp the tines 
and release from notch to reposition as shown in Figure 5. 

The top rack can be lowered to accommodate large items in the top rack, and raised to 
make room for large items in the bottom rack.

To raise the top rack:

1.  Pull the top rack out of the dishwasher until it stops rolling.

2.  Grasp the top of the rack above the Automatic Height-Adjustable Top Rack handles 

and pull it upward as shown in Figure 6 until the Automatic Height-Adjustable Top 
Rack handles lock the rack into position (you do not need to press the Automatic 
Height-Adjustable Top Rack handles in order raise the rack).

NOTE: Before you push the top rack back into the dishwasher, ensure that the rack height 
is the same on both sides. Otherwise, the dishwasher door will not shut and the top rack 
spray arm will not connect to the water circuit.

To lower the top rack:

1.  Pull the top rack out of the dishwasher until it stops rolling.

2.  Press the Automatic Height- Adjustable Top Rack handles inward as shown in  

Figure 7 and let the rack drop.

Cup Shelves  
In addition to cups, the shelves shown in Figure 8 can also hold large utensils. Grasp the 
cup shelves and fold them down. Place cups upside-down on the cup shelves. 

10 place setting bottom rack 

12 place setting bottom rack