Dualit DCM1 Manual De Usuario

The coffee machine must be fully rinsed through with
water before the first use.

1. Follow the instructions as if making an espresso, pages 

18 to 21, but leave the filter holder (7) empty, i.e. no 
filter (17), (18) or (19) and no ground coffee.

Empty the whole water tank (11) through the 
machine; this will rinse the internals ready for brewing 
coffee.

2. Refill the tank and steam as per instructions on page 

22 for 15 seconds then dispense hot water as on 
page 21 for 15 seconds.

3. Before they are used the filter holder, measuring 

spoon, filters, water tank and froth nozzle (16) must be
washed with detergent and lukewarm water, then 
rinsed and dried.

NOTE: The control knob (5) may be a harder to turn
when the machine is new. This will loosen with use.

16

Before each use the coffee machine needs to be primed
ready for brewing.

1. Make sure the machine is unplugged.

2. Fill the water tank by either opening the lid and 

pouring water directly into the tank using a jug or 
bottle, or by removing the tank and filling it at the 
sink. To do this, hold the sides of the water tank and 
lift it straight up. When replacing the water tank, 
hook it over the lugs and make sure it has engaged 
properly in the valve at the base. 

Ideally you should use bottled or filtered water. This will
reduce the build up of limescale inside the machine and
produce a better tasting espresso.

DCM1 instruction manual_figs out.qxp  18/04/2008  14:30  Page 16