Bunn Smart Wave Series Manual De Usuario

Page 13

The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all 

surfaces on Bunn-O-Matic equipment.

1.  Remove the brew funnel.

2.  Remove the sprayhead by turning it counterclockwise with your fingertips.

3.  Disassemble sprayhead by removing rubber gasket. 

4.  Check the holes in the sprayhead. If plugged by lime, they may be cleared using a toothpick. Rinse the 

sprayhead with water.

5.  Reassemble the sprayhead according to FIG 11. NOTE: Verify the indents are aligned. (ARROWS)

6.  Reinstall the sprayhead by turning it clockwise. Hand tighten only!

40410  092407