Bunn TB6 Manual De Usuario

Page 6

Inconsistent beverage level in 

dispenser

Consistently low beverage level 

in the dispenser 

Spitting or excessive steaming

1. Strainer /flow control             

(If equipped)

2. Syphon System

3. Lime Build-up

CAUTION - Tank and tank com-

ponents should be delimed 

regularly depending on local 

water conditions. Excessive min-

eral build-up on stainless steel 

surfaces can initiate corrosive 

reactions resulting in serious 

leaks.

4. Water Pressure 

1. Timer

2. Strainer/flow Control  

 

(If equipped)

1. Lime Build-up

CAUTION - Tank and tank com-

ponents should be delimed 

regularly depending on local 

water conditions. Excessive min-

eral build-up on stainless steel 

surfaces can initiate corrosive 

reactions resulting in serious 

leaks.

(A) Direction of flow arrow must 

be pointing towards the brewer.

(B) Remove the strainer/flow 

control and check for obstruc-

tion. Clear or replace.

The brewer must be level or 

slightly lower in front to syphon 

properly.

Inspect the tank assembly for 

excessive lime deposits. Delime 

as required.

The water pressure to the brewer 

must be at least 20 psi (138kPa) 

and minimum 1.0 gpm flow rate.

Timer dial must indicate at least 

two minutes and fifteen seconds.

Refer to Operating Manual.

(A) Direction of flow arrow must 

be pointing towards brewer.

(B) Remove the strainer/flow 

control and check for obstruc-

tions. Clear or replace.

Inspect tank assembly for exces-

sive lime deposits. Delime as 

required.

41722 070209