Bunn ITCB Manual De Usuario
Page 75
TROUBLESHOOTING (cont.)
PROBLEM
PROBABLE CAUSE
REMEDY
Weak beverage.
BUNN paper fi lters should be used
for proper extraction
for proper extraction
For coffee, a suffi cient quantity of
fresh drip or regular grind should
be used for proper extraction. For
tea, a suffi cient quantity of fresh,
loose tea leaves should be used for
proper extraction.
fresh drip or regular grind should
be used for proper extraction. For
tea, a suffi cient quantity of fresh,
loose tea leaves should be used for
proper extraction.
Bunn-O-Matic sprayhead should
be used to properly wet the bed of
ground coffee or tealeaves in the
funnel
be used to properly wet the bed of
ground coffee or tealeaves in the
funnel
The BUNN paper fi lter should be
centered in the funnel and the bed
of grounds or tealeaves leveled by
gently shaking.
centered in the funnel and the bed
of grounds or tealeaves leveled by
gently shaking.
Empty the server, remove its cover,
and place the server beneath the
sprayhead. Place empty funnel over
the server entrance (not in the funnel
rails). Press brew. Check the water
temperature immediately below
the sprayhead with a thermometer.
The reading should not be less than
195°F (90.5° C).
and place the server beneath the
sprayhead. Place empty funnel over
the server entrance (not in the funnel
rails). Press brew. Check the water
temperature immediately below
the sprayhead with a thermometer.
The reading should not be less than
195°F (90.5° C).
Consider adjusting brew volumes,
dilution volumes, dilution delay and
pulse brew routines. Contact Bunn-
O-Matic for suggestions.
dilution volumes, dilution delay and
pulse brew routines. Contact Bunn-
O-Matic for suggestions.
1. Type of paper fi lter
2. Coffee or tealeaves
3. Sprayhead
4. Funnel Loading
5. Water temperature
6. Incorrect recipe
36748 041504