Bunn CRT5 Manual De Usuario

Page 16

Location:

The limit thermostat is located inside the rear of

the hood on the tank lid.

Test Procedures:
1. Disconnect the brewer from the power source.
2. Disconnect the blue and black wires from the limit

thermostat.

3. Check for continuity across the limit thermostat

terminals with a ohmmeter.

P1800

FIG. 4 LIMIT THERMOSTAT

P2186.40

FIG. 5 LIMIT THERMOSTAT TERMINALS

BLK to Tank
Heater Switch

BLU to BLU Lead from
Control Thermostat

10478 061500

If continuity is present as described, the limit thermo-
stat is operating properly.
If continuity is not present as described, replace the
limit thermostat.

Removal and Replacement:
1. Remove all wires from limit thermostat terminals.
2. Carefully slide the limit thermostat out from under

the retaining clip and remove limit thermostat.

3. Carefully slide the new limit thermostat into the

retaining clip.

4. Refer to the Fig. 5 when reconnecting the wires.