Bunn 41343 Manual De Usuario

Page 33

 

This function allows the operator to view or to enter 

the actual flow rate coming out of the bypass nozzle.  

This is NOT used to change the actual flow rate, but to 

tell the internal controller how fast the water is flowing. 

The unit of measure is ounces per minute. 

1.  Press and hold the upper right hidden switch until 

the display reads UNITS. Release the switch, then 

press and release switch until the display reads  

BYPAS OZ/M. The number represents what the 

brewer thinks is the flow rate of the bypass valve 

in ounces per minute.

2.  If the actual flow rate of the bypass valve is known, 

but is different than the number on the display, 

use the (-) and (+) to enter the correct flow rate 

in ounces per minute.

3.  When finished, press and release DONE. This saves 

the new setting and advances to the next function 

screen, CALIBRATE FLOW. Another alternative is to 

press the ON/OFF switch located on the front switch 

panel to exit the BYPASS OZ/M function and return to 

the MAIN SCREEN. 

 

This function allows the operator to view or to enter 

the actual flow rate coming out of the bypass nozzle.  

This is NOT used to change the actual flow rate, but to 

tell the internal controller how fast the water is flowing. 

The unit of measure is ounces per minute. 

1.  Press and hold upper right hidden switch until 

display reads UNITS. Release switch. Continue 

to press and release switch until display reads L 

BYPASS OZ/M. The number represents what the 

brewer thinks is the flow rate of the bypass valve 

in ounces per minute.

2.  If the actual flow rate of the bypass valve is known, 

but is different than the number on the display, 

use the (-) and (+) to enter the correct flow rate 

in ounces per minute.

3.  When finished,  press and release the DONE.   This 

saves the new setting and advances to R BYPS 

OZ/M. When finished setting right side, press and 

release DONE to advance to next function screen, 

CALIBRATE FLOW. Another alternative is to press 

and release either ON/OFF switch located on the 

front switch panel to exit the BYPASS OZ/M func-

tion and return to the MAIN SCREEN.

41343 080108