Capresso 464 Manual De Usuario
12.
12. CLEANING
CAUTION: Make sure machine is turned off and cooled down.
Never use scouring agents. Never immerse the machine in any
liquid. Never clean machine under running water. Dishwasher
safe (upper rack): GoldTone Filter and Filter Insert.
Special Cleaning Tips:
12a. GoldTone Filter: Clean after brewing. Do not let used
coffee sit for hours in the filter. Coffee oils will clog the mesh,
causing the coffee to overflow the next time you brew coffee.
12b. Filter Insert /Drip Stop: Clean the Filter Insert and the drip
stop under running water. Test that the drip stop closes
completely under running water (Fig 5).
12c. Bean Container: When the bean container is empty, use a
dry cloth to wipe off any oil deposits. Never pour any liquid into
the bean container. Never try to disassemble the bean container.
12d. The Feeder Channel: Periodically check the feeder channel
for oil and coffee build-up. As long as you can see coffee flowing
freely through the feeder channel window there is no need to
open the cover. The feeder channel should be cleaned in any of
the following situations:
• moisture or heavy oil build-up has caused the ground coffee
CAUTION: Make sure machine is turned off and cooled down.
Never use scouring agents. Never immerse the machine in any
liquid. Never clean machine under running water. Dishwasher
safe (upper rack): GoldTone Filter and Filter Insert.
Special Cleaning Tips:
12a. GoldTone Filter: Clean after brewing. Do not let used
coffee sit for hours in the filter. Coffee oils will clog the mesh,
causing the coffee to overflow the next time you brew coffee.
12b. Filter Insert /Drip Stop: Clean the Filter Insert and the drip
stop under running water. Test that the drip stop closes
completely under running water (Fig 5).
12c. Bean Container: When the bean container is empty, use a
dry cloth to wipe off any oil deposits. Never pour any liquid into
the bean container. Never try to disassemble the bean container.
12d. The Feeder Channel: Periodically check the feeder channel
for oil and coffee build-up. As long as you can see coffee flowing
freely through the feeder channel window there is no need to
open the cover. The feeder channel should be cleaned in any of
the following situations:
• moisture or heavy oil build-up has caused the ground coffee
to block the feeder channel, or
• you do not plan on using the grinder for more than a week.
For cleaning, please follow this sequence:
• Make sure the GoldTone filter is inserted in the Filter Insert.
• With a pointed tip push the small pin in the window down and
• With a pointed tip push the small pin in the window down and
slide the plastic cover forward (fig. 6 & 7).
• Wipe the inside clean with a dry cloth.
• Replace the feeder channel cover.
• Replace the feeder channel cover.
13. Decalcifying
When the brewing process slows down, it is time to decalcify
your CoffeeTEAM. If you use your CoffeeTEAM daily we
When the brewing process slows down, it is time to decalcify
your CoffeeTEAM. If you use your CoffeeTEAM daily we
recommend to descale at least twice a year. If you use hard
water, it might be necessary to descale more often.
Important:
• Before decalcifying, remove the Goldtone Filter and Charcoal
Filter.
water, it might be necessary to descale more often.
Important:
• Before decalcifying, remove the Goldtone Filter and Charcoal
Filter.
13a. Decalcifying with Capresso Cleaning Solution
Capresso recommends Capresso Cleaning Solution for drip
coffee makers. Order through www.capresso.com.
1. Remove GoldTone Filter and Charcoal Filter.
2. Dissolve 1 oz. (28 g) of Capresso Cleaning Solution with 32
Capresso recommends Capresso Cleaning Solution for drip
coffee makers. Order through www.capresso.com.
1. Remove GoldTone Filter and Charcoal Filter.
2. Dissolve 1 oz. (28 g) of Capresso Cleaning Solution with 32
oz. (1 L) of water and pour mixture into water tank.
3. Important: Make sure the Filter Insert is in place and the
carafe is empty.
4. Place the carafe with the lid closed into the machine.
5. The BREW light is illuminated. Push the ON/OFF button.
6. When the solution has run through, remove the carafe, empty
5. The BREW light is illuminated. Push the ON/OFF button.
6. When the solution has run through, remove the carafe, empty
and rinse thoroughly.
Important: let the machine cool down for 5 minutes.
Important: let the machine cool down for 5 minutes.
7. Fill 20 oz. of fresh cold water into the water tank and brew
through the machine.
13b. Using other Decalcifying Agents
• All decalcifying agents are acidic and must be handled
• All decalcifying agents are acidic and must be handled
carefully. Check the information on the packaging before using.
Only use decalcifying agents suitable for drip coffee makers
and follow the instructions which come with the agent.
Only use decalcifying agents suitable for drip coffee makers
and follow the instructions which come with the agent.
•
When the solution has run through, remove the carafe, empty
and rinse thoroughly.
Important: let the machine cool down for 5 minutes.
Important: let the machine cool down for 5 minutes.
• Fill 20 oz. of fresh cold water into the water tank and brew
through the machine.