Capresso 465 Manual De Usuario

Important:
• CoffeeTEAM TS (thermal stainless steel carafe): when brewing 

coffee, always use with the lid closed.

• Let some water brew through the machine without any coffee 

as follows. 

• Plug in machine and make sure the GoldTone filter and filter 

insert are in place.

• Fill the water tank with approx. 20 oz. of water and place the

carafe with lid in the machine.

• Push the BREW button, then the ON/OFF button (Fig. 2).

The machine starts processing the water into the carafe.

• After all water has passed through, push the ON/OFF button

again to turn off machine.

• Empty carafe

9.1 CLOCK AND GRINDER SETTINGS 
Plug in machine. The display shows “0:00” blinking and either
the “BREW” or the “GRIND/BREW” light is illuminated (Fig. 2).
Please note: You must set the actual time before you can operate
the coffee maker.

a) Setting the Actual Time
• The display shows “0:00” blinking
• Push and hold the H button until the actual hour is displayed. 

The display will also show AM or PM.

• Push and hold the M button until the minutes are displayed.
The time is now set.
Please note: You must change the clock when the time changes
(Standard time /Daylight Savings time).

b) Setting the Auto-On Time
You can only set the Auto-On Time after the actual time is set.

• Push and hold the PROG button until the display shows AUTO 

and a random number is blinking. 

• Keep the PROG button depressed.
• Push and hold the H, then the M button to set Auto-On time.
• Release the PROG button. The display reverts to the actual time.

c) To change the Auto-On Time
• Push and hold the PROG button until the display shows AUTO.

Keep the PROG button depressed.

• Push and hold the H and then the M button to set a new 

Auto-On time.

• Release the PROG button. The display reverts to the actual time.

d) Checking the Auto-On Time
• Push and hold the PROG button. The display shows the word 

“AUTO” and the Auto-On time.

• Release the PROG button. The display reverts to the actual time.

e) Activating the Auto-On Time
• Push the PROG button briefly. The display shows “AUTO” and 

the green Auto-On light illuminates, indicating the Auto-On setting
is active. The machine will show the actual time. At the pre-
programmed time the machine starts grinding and brewing (or 
brewing only). For details see chapter 10.2 & 11.1.

f) Grind Volume Setting: the “2-10” button
Please note: the CoffeeTEAM lets you set two different grinder
settings: one for immediate use and one for Auto-On use. For
both uses the default setting is “10”.

For immediate use: Push the “2-10” button repeatedly to select
from 2, 4, 6, 8, 10.
For Auto-On use: Push and hold the PROG button until the
word “AUTO” is displayed. Keep the PROG button depressed
and then push the “2-10” button to select from 2, 4, 6, 8, 10. 

8.