Seal-a-Meal VS240 Manual De Usuario

-5-

1. Open Lid and place bag roll into roll storage compartment.
2. Lift up Bag Cutter Bar.
3. Pull enough bag material from roll to hold item to be vacuum packaged, plus 3 inches. Lower

the Bag Cutter Bar. 

4. Cut desired bag length from Bag Roll.  Make sure to cut a straight line. Plug in Power Cord.

5. Open the Lid. Place one end of the cut bag between the Sealing Strip and the Lower Sealing

Gasket. DO NOT place open end of bag in the Drip Tray

6. Close Lid. Position hands on both sides of the Lid. Press firmly on both sides of the Lid and hold

until the motor starts. 

NOTE: Sealer will not operate if Lid is not properly closed.

7. Continue to hold the Lid. When the Hands-free Indicator Light illuminates, it is safe to remove

your hands from the Lid. The Sealing Indicator Light illuminates when the unit starts sealing the
bag. 

Carefully unpack your Seal-a-Meal

®

Vacuum Sealer and place it on a level surface. Be sure to

remove all packing materials from the inside of the machine. 

Clean all parts according to the CARE AND CLEANING section in this manual before first use.

-4-

Bag Cover

Open/Cancel Button

Hands-free Indicator Light

Sealing Indicator Light

Accessory Port

Accessory Hose Adapter

Accessory Hose

Sealing Strip

Lower Sealing
Gasket

Removable
Drip Tray

Vacuum Indicator Light

Seal Level Switch

Bag Cutter Bar

Bag Cutter

Upper Sealing
Gasket

VS230_VS240_07EM1.qxd:VS230_VS24006EM1p.qxd  10/11/07  7:05 PM  Page 5