Hobart FP300 Manual De Usuario

– 3 –

WARNING:  THE ELECTRICAL CORD HAS A THREE-PRONGED GROUNDING PLUG WHICH
MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE.  IF THE RECEPTACLE IS
NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.  DO NOT REMOVE THE
GROUNDING PRONG FROM THE PLUG.

FP300

120  /  60  /  1   

10

WARNING:  ROTATING KNIVES INSIDE.  ALWAYS USE PUSHER PLATE.  KEEP HANDS OUT.

Proper assembly of the FP300 including selection of the appropriate cutters is necessary for correct
operation of the food processor (Figs. 1 & 2).   Refer to the Cutting Tool Guide for sizes of cutters and
refer to the appropriate operation instructions.

START (Green) — Push to start.

STOP (Red) — Push to stop.

Interlock switches prevent the machine from operating when the feed hopper is out of position or the
pusher plate is raised above the feed hopper.  If these features do not function as described, contact
your local Hobart service office.

During operation, when the pusher plate is fully raised above the feed hopper, the machine stops and
allows the pusher plate to be rotated counterclockwise for loading.  To continue operation, rotate the
pusher plate clockwise until it is directly above the feed hopper; as the pusher plate begins to lower
into the hopper, the machine will restart — you do not need to push the green START switch unless
STOP was pressed.

Always push the red STOP switch before changing cutters or cleaning.