Panasonic AW-PH405N Manual De Usuario



  Bearing in mind the length of the lens, set the movement range of the pan-tilt head using the limiters in such a way that the 

hood at the edge of the lens will not come into contact with the surface on which the pan-tilt head is installed when the pan-tilt 
head is tilted.

   

  To point the lens any further straight down in a 

stand-alone installation, insert a spacer between  
the pan-tilt head and mounting surface to raise the 
pan-tilt head position. 
Make sure that the spacer has a strong enough 
construction. Also ensure that the mounting bolts 
used are long enough.



  When the pan-tilt head is installed on the ceiling, contact with the pan-tilt head body may be made by the protrusion of the 

drive unit when tilting operations are performed. For this reason, set the limiters before proceeding with the installation work.



  Do not tie the connected lens cable and camera cable together as a bundle. During operation, excessive strain may be placed 

on cables which have been bundled together. Instead, be absolutely sure to tie them separately.

  Be absolutely sure to use a screwdriver or other tool to tighten the two camera mounting screws 

so that the camera is secured firmly.

 After the camera has been mounted, check that there is no play in the way it was mounted.