ADIC 601354 Manual De Usuario
Administrative Tasks
601354 Rev A
Initial Configuration
3-35
Initial
Configuration
Add Media to an
Archive
Archive
After at least one archive media class is successfully
configured, media can be entered into an archive. In fact,
normal operations cannot begin until media are entered into an
archive.
configured, media can be entered into an archive. In fact,
normal operations cannot begin until media are entered into an
archive.
Four basic methods are used to add media to most automated
archives. These methods use the Import Media command
(refer to
archives. These methods use the Import Media command
(refer to
),the bulk
load operation (refer to
unsolicited enter operation (refer to
), and the enter operation (refer to
).
To enter media into a DataShelf or Stage archive, only the
Import Media command can be used.
Import Media command can be used.
When importing media into an archive, media labels must be
affixed to them. Refer to
affixed to them. Refer to
The Import Media command is the preferred method to use
when entering relatively few media into an automated archive.
The bulk loading method is preferred if there are a relatively
large amounts of media to be entered. For specific automated
archives, the enter or unsolicited enter operations are allowed
by VolServ.
when entering relatively few media into an automated archive.
The bulk loading method is preferred if there are a relatively
large amounts of media to be entered. For specific automated
archives, the enter or unsolicited enter operations are allowed
by VolServ.
Note
VolServ has to be running to add media to an archive.