HP BL680c G5 443527-B21 Manual De Usuario
Los códigos de productos
443527-B21
1.
2.
3.
4.
4.
5.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: Configure-to-order servers must start with a CTO Blade.
NOTE: FIO indicates that this option is a factory installable option.
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: Configure-to-order servers must start with a CTO Blade.
NOTE: FIO indicates that this option is a factory installable option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL680c G5 Configure-to-order Server
443527-B21
Configurable model ships with:
Four (4) embedded Gigabit Ethernet network adapter ports, plus one (1)
additional management network adapter port:
additional management network adapter port:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with
TCP/IP offload engine for Microsoft Windows, iSCSI boot, and optional
accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2
management
TCP/IP offload engine for Microsoft Windows, iSCSI boot, and optional
accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2
management
Integrated HP Smart Array P400i Controller with RAID 0 and 1.
NOTE: A controller cache module selection is required. In the "HP Storage
Controllers" section of step 2 below, select either the 256 MB module (with or
without optional BBWC) or the 512 MB module with BBWC.
Controllers" section of step 2 below, select either the 256 MB module (with or
without optional BBWC) or the 512 MB module with BBWC.
Two (2) small form factor (SFF) SAS/SATA hot-plug hard drive bays
Three I/O expansion slots: one Type I x4 PCIe (15 watts) and two x8 PCIe (25
watts)
Integrated Lights-Out 2 Standard Blade Edition
Three I/O expansion slots: one Type I x4 PCIe (15 watts) and two x8 PCIe (25
watts)
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
noted):
HP Processors
NOTE: The BL680c G5 supports either two or four processors. One and three processors
are not supported.
NOTE: All processors within the server must be identical.
NOTE: All processor kits contain two (2) processors.
NOTE: If 4 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
are not supported.
NOTE: All processors within the server must be identical.
NOTE: All processor kits contain two (2) processors.
NOTE: If 4 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Six-Core Processors
HP BL680c G5 Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) FIO Processor Kit
517411-L21
HP BL680c G5 Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) FIO 2-processor Kit
492344-L21
HP BL680c G5 Intel® Xeon® L7455 (2.13GHz/6-core/12MB/65W) FIO 2-processor Kit
492348-L21
Four-Core Processors
HP BL680c G5 Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) FIO 2-processor Kit
492345-L21
HP BL680c G5 Intel® Xeon® E7430 (2.13GHz/4-core/12MB/90W) FIO 2-processor Kit
492346-L21
HP BL680c G5 Intel® Xeon® E7420 (2.13GHz/4-core/8MB/90W) FIO 2-processor Kit
492347-L21
HP BL680c G5 Intel® Xeon® L7445 (2.13GHz/4-core/12MB/50W) FIO 2-processor Kit
493577-L21
HP Memory
HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit
461828-B21
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Configuration Information - Factory Integrated Models
DA - 12773 Worldwide — Version 43 — July 6, 2012
Page 15