Beko CFD 6913 APX Manual De Usuario

Descargar
Página de 30
EN
10
3. Do not place the appliance near 
cookers, radiators or in direct sunlight 
as this will cause your appliance to 
work harder. If installed next to a 
source of heat or freezer, maintain the 
following minimum side clearances:
From Cookers  50 mm (2”)
From Radiators 300 mm (12”)
From Freezers  25 mm (1”)
4. Make sure that sufficient room 
is provided around the appliance to 
ensure free air circulation. Fit the two 
plastic wall spacers supplied with the 
appliance to the condenser on the 
back of the appliance by rotating 1/4 
turn.
 (See Diagram)
5.
 The fridge/freezer should be 
located on a smooth surface. The 
two front feet can be adjusted as 
required. To ensure that your appliance 
is standing upright adjust the two 
front feet by turning clockwise or 
anti-clockwise, until the product is 
in firm contact with the floor. Correct 
adjustment of feet avoids excessive 
vibration and noise.
6. Refer to cleaning and care section 
to prepare your appliance for use.
7. A special receptacle is supplied 
to store the mains plug during transit. 
The receptacle is fixed at the back 
of the cabinet, on the side of the 
compressor. 
(See diagram) Gently 
remove the plug from the receptacle. 
Never pull the mains cord, you may 
damage the appliance. In the case 
of transportation, ensure you locate 
the plug in the receptacle provided to 
avoid transit damage.