Beko CFD 6913 APX Manual De Usuario
EN
23
• Push the arm of the water dispenser
with a rigid glass. If you are using
disposable plastic glasses, push the
arm with your fingers from behind the
glass.
disposable plastic glasses, push the
arm with your fingers from behind the
glass.
1
1
2
Cleaning the water tank
Release the tank cover from the
water tank by opening latches at both
sides. Remove the water tank and
clean with warm and clean water.
Place the water tank to its seating,
install the tank cover and close the
latches.
sides. Remove the water tank and
clean with warm and clean water.
Place the water tank to its seating,
install the tank cover and close the
latches.
3
Make sure that the parts removed
(if any) during cleaning are properly
attached to their original places.
Otherwise, water leakage may occur.
Important:
attached to their original places.
Otherwise, water leakage may occur.
Important:
Components of the water tank and
water dispenser should not be washed
in dishwasher.
Water tray
in dishwasher.
Water tray
Water that drips while using the water
dispenser accumulates in the spillage
tray. Take out the spillage tray by
pulling it towards yourself and empty it
regularly.
tray. Take out the spillage tray by
pulling it towards yourself and empty it
regularly.
Take out the plastic strainer by
pressing it on sides.
Take the water valve out of the water
tank. When replacing it, make sure
that the seal is in place.
that the seal is in place.