Beko UL584APS Manual De Usuario

Descargar
Página de 20
EN
15
Defrosting
The larder fridge defrosts automatically. 
The defrosting water runs to the drain 
tube via a collection channel and is 
evaporated in a special container (1)
at the back of the appliance (see 
diagram). 
During defrosting water droplets 
may format the back of the larder 
fridge where concealed evaporator is 
located. Some droplets may remain on 
the liner and refreeze when defrosting 
is completed. 
Do not use pointed or sharp edged 
objects such as knives, forks to 
remove the droplets which have 
refreezed.If at any time the defrost 
water does not drain from the 
collection channel, check to ensure 
that no food particles have blocked 
the drain tube. The drain tube can be 
cleared by pushing the special plastic 
plunger provided down the drain tube.
1
2
Replacing The Interior Light Bulb 
(See Diagram)
Should the light fail to work switch 
off at the socket 
outlet and pull out 
the mains plug. 
Follow the below 
instructions to 
check if the light 
bulb has worked 
itself loose.
If the light still fails 
to work obtain a 
replacement E14 
screw cap type 15 
Watt (Max) bulb 
from your local 
electrical store 
and then fit it as 
follows:
1.  Switch off at 
the socket 
outlet and pull 
out the mains 
plug. You may 
find it useful to 
remove shelves 
for easy access.
2.  Remove the 
light diffuser 
cover as shown 
in figure (b-c).
3.  Replace the 
burnt-out light 
bulb.
4.  Reassemble the light diffuser cover 
as shown in figure (d).“Push firmly to 
ensure cover is fitted properly.”
5.  Carefully dispose of the burnt-out 
light bulb immediately.“Replacement 
light bulb can easily be obtained 
from a good local electrical or DIY 
store.”