Frigidaire FPHI2188PF Manual De Usuario

13

Interior & 

Door Liners

•  Soap and water
•  Baking soda and water

Use 2 tablespoons of baking soda in 1 quart of warm water.

Be sure to wring excess water out of sponge or cloth before 

cleaning around controls, light bulb or any electrical part.

Door 

Gaskets

•  Soap and water

Wipe gaskets with a clean soft cloth.

Drawers & 

Bins

•  Soap and water

Use a soft cloth to clean drawer runners and tracks.

Glass 

Shelves

•  Soap and water
•  Glass cleaner
•  Mild liquid sprays

Allow glass to warm to room temperature before immersing 

in warm water.

Toe Grille

•  Soap and water
•  Mild liquid sprays
•  Vacuum attachment

Vacuum dust from front of toe grille. Remove toe grille (see 

Installation Instructions). Vacuum backside, wipe with sudsy 

cloth or sponge. Rinse and dry.

Exterior & 

Handles

•  Soap and water
•  Non Abrasive Glass 

Cleaner

Do not use commercial household cleaners containing 

ammonia, bleach or alcohol to clean handles. Use a soft 

cloth to clean smooth handles. DO NOT use a dry cloth to 

clean smooth doors.

Exterior & 

Handles
(Stainless 

Steel Models 

Only)

•  Soap and water
•  Stainless Steel 

Cleaners

Never use CHLORIDE or cleaners with bleach to clean 

stainless steel.
Clean stainless steel front and handles with non-abrasive 

soapy water and a dishcloth. Rinse with clean water and a 

soft cloth.  Use a non-abrasive stainless steel cleaner. These 

cleaners can be purchased at most home improvement or 

major department stores. Always follow manufacturer’s 

instructions. Do not use household cleaners containing 

ammonia or bleach.
NOTE: Always clean, wipe and dry with the grain to prevent 

scratching. Wash the rest of the cabinet with warm water 

and mild liquid detergent. Rinse well, and wipe dry with a

clean soft cloth.

Replacing 

Light Bulbs

•  Unplug refrigerator
•  Wear gloves 
•  Remove light cover
•  Replace old bulb 
•  Replace light cover
•  Plug in the refrigerator

CAUTION: Wear gloves when replacing light bulbs to avoid 

getting cut. Use same wattage when replacing bulb