Crane Merchandising Systems 670 Manual De Usuario
HOT DRINK SETUP/PROGRAMMING GUIDE
November, 2002
Page - 94
6700001
VIEW AMOUNT IN VALIDATOR (NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
DBV XX.XX.
"XX.XX" is the dollar amount in the bill stacker.
2. Press
to show the quantities of bills in the stacker. For
example, the display shows
$0120
, meaning that there are 20 dol-
lar bills in the bill stacker. Press
again to show the quantities
of other bills, such as $5s, $10s, or $20s.
3. CONTINUE.
VIEW DIAGNOSTIC MESSAGES
Press
. The display shows any of the following diagnostic
messages, depending upon any fault(s) present:
NO ERRORS
None of the following errors are detected:
KEYPAD XY
Key(s) x, y stuck.
ROM ERROR
Key(s) x, y stuck.
RAM ERROR
RAM is not initialized or is not compatible with
the currently loaded software. If this message
appears, initialize your RAM by performing the
following procedure:
the currently loaded software. If this message
appears, initialize your RAM by performing the
following procedure:
NOTE:
Initializing RAM will erase all your data and drink settings.
Be sure you have written this information down before continuing.
Be sure you have written this information down before continuing.
Press and hold
until two beeps are heard, and the display
shows
FINISHED.