Crane Merchandising Systems 6530006 Manual De Usuario
Hot Drink Center Set-Up Manual
6530006
23
March, 2001
HYDROLIFE BRAND...
INSTALLATION:
1.
Place the filter inside the canister. Be sure the o-ring is seated in the canis-
ter just below the threads.
ter just below the threads.
2.
Screw the canister and filter assembly onto the filter head until it comes to a
stop.
stop.
3.
Open the water valve on the inlet line by rotating the handle to the vertical
position as shown.
position as shown.
REMOVAL
4.
Close the valve on the inlet line by rotating the handle into the horizontal
position as shown.
position as shown.
5.
Relieve water pressure by performing two or three water throws (see the
Programming Guide).
Programming Guide).
6.
Unscrew the filter and canister assembly from the filter head. Remove the
filter from the canister.
filter from the canister.
FILTER
CANISTER
O-RING
OPEN
POSITION
HYDROLIFE
FILTER HEAD
INSTALL
REMOVE
OPEN
POSITION
CLOSED
POSITION
VALVE