Garland ECG Manual De Usuario
2
DO NOT operate the product unless all service and access panels are in place and fastened
properly.
properly.
DO NOT attempt to repair or replace any part of this product unless all main power supplies
have been disconnected.
have been disconnected.
WARNING - to avoid personal injury:
USE EXTREME CAUTION in setting up, operating and cleaning this product to avoid coming
into contact with hot grill surfaces or hot grease. Suitable protective clothing should be worn to
prevent the risk of burns.
NOTE all warning labels and markings on the product, which call attention to further dangers
and necessary precautions.
into contact with hot grill surfaces or hot grease. Suitable protective clothing should be worn to
prevent the risk of burns.
NOTE all warning labels and markings on the product, which call attention to further dangers
and necessary precautions.
WARNING – This appliance must not be cleaned with a water jet.
TECHNICAL SPECIFICATIONS
LOADING CHART
LOAD PER PHASE
AMPS PER PHASE
MODEL
TOTAL
kW LOAD
Voltage
X-Y
X-Z
Y-Z
X
Y
Z
Amps
1 phase
8.60
208
2.60
3.00
3.00
23.3
23.3
25.0
41.3
ECG-24R
8.60
240
2.60
3.00
3.00
20.2
20.2
21.7
35.8
12.90
208
4.30
4.30
4.30
35.8
35.8
35.8
62.0
ECG-36R
12.90
240
4.30
4.30
4.30
31.0
31.0
31.0
53.8
17.20
208
5.60
6.00
5.60
48.3
46.6
48.3
82.7
ECG-48R
17.20
240
5.60
6.00
5.60
41.9
40.4
41.9
71.7
21.50
208
6.90
7.30
7.30
59.1
59.1
60.8
103.4
ECG-60R
21.50
240
6.90
7.30
7.30
51.2
51.2
52.7
89.6
25.80
208
8.60
8.60
8.60
71.6
71.6
71.6
124.0
ECG-72R
25.80
240
8.60
8.60
8.60
62.1
62.1
62.1
107.5
EXTERIOR DIMENSIONS
MODEL
HEIGHT
WIDTH
DEPTH
WEIGHT
mm
ins
mm
ins
mm
ins
kg
Lb.
ECG-24R
905
35 5/8
610
24
889
35
120
265
ECG-36R
905
35 5/8
914
36
889
35
181
400
ECG-48R
905
35 5/8
1219
48
889
35
227
500
ECG-60R
905
35 5/8
1524
60
889
35
272
600
ECG-72R
905
35 5/8
1829
72
889
35
318
700
ELECTRICAL SUPPLY
Before attempting the electrical connection, the rating plate should be checked to ensure that the
equipment’s electrical characteristics agree. On Electric Chain Griddles, the supply entrance is
located at the rear of the main bottom. The supply terminal block is accessible from the front.
equipment’s electrical characteristics agree. On Electric Chain Griddles, the supply entrance is
located at the rear of the main bottom. The supply terminal block is accessible from the front.
ELECTRICAL SUPPLY
CONTINUED
The electrical supply must be adequate for the voltage, phase and current marked on the rating
plate.
plate.