Panasonic KX-TD816 Manual De Usuario

Descargar
Página de 388
DPT Overview
User Manual
33
When using the headset
The Panasonic Digital Super Hybrid System supports the use of a headset with a proprietary 
telephone (PT). When you use the headset (optional), you should switch the selection mode 
first. Selection is explained in the "Handset / Headset Selection" in Station Programming. 
To change to the headset mode
Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM]. 
Changing the ringing tone of a CO button / Intercom calls 
There are eight ringer frequencies available for each CO (Single-CO, Group-CO, Loop-CO) 
button and INTERCOM button. If you wish to change them, refer to "Ringing Tone Selection 
for CO Buttons", "Ringing Tone Selection for Intercom Calls" in Station Programming. 
Volume Control — Handset Receiver/Headset/Ringer/Speaker 
Allows you to adjust the following volumes as required. 
— Handset Receiver volume (levels 1 through 4) 
— Headset volume (levels 1 through 4)
— Ringer volume (levels 0 through 3)
— Speaker volume (levels 1 through 12)
If your digital proprietary telephone is provided with a display (display DPT), the volume level 
is indicated on the display by the number of asterisks. For ringer volume adjustment, three 
levels (OFF/LOW/HIGH) are available with the KX-T7420 and KX-T7425.
To adjust the handset receiver volume
You may also adjust the handset receiver volume during a conversation using the 
handset receiver.
Display PT
Lift the handset.
Rotate Jog Dial in the desired direction.
<PT Display Example>
Handset:
***
(-volume level 3)