Panasonic KX-TD816 Manual De Usuario

Station Programming

User Manual

Confirming the assigned function data

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

— If you wish to change the data, follow the programming procedure explained in this section.

Press HOLD (END).

Enter the program access number.

program access number

HOLD

Enter the program access number* as follows.

- 1:Preferred Line Assignment - Outgoing
- 2:Preferred Line Assignment - Incoming
- 3:Full One-Touch Dialing Assignment
- 4:Intercom Alert Assignment
- 5:Call Waiting Tone Type Assignment
- 6:Self-Extension Number Confirmation
- 7:Live Call Screening Mode Set

-81:Initial Display Selection
-82:Bilingual Display Selection
- 9 :Handset/Headset Selection
-01:Remote Station Look Control (- Operator / Manager only)
-02:Call Log Lock Control, Incoming (- Operator / Manager only)
-03:Live Call Screening Password Control (- Operator / Manager only)
- #:Station Programming Data Default Set

The display shows the programmed data.

<PT Display Example>
When you press [5], the display shows:

(- The Call Waiting tone is currently programmed to Tone 1.)

The display shows the initial programming mode.

C.W. Tone1

† : Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
Voice Processing System (one that supports digital proprietary telephone integration; e.g., KX-TVS100)

* A programming access number is required to program/confirm the function data by Station Programming.

†