Vermont Casting 3LDVT Manual De Usuario

24

1.  Place rear log (BD15) on rear bracket 

(ensure log is centered and seated 
properly to the log support).

2.  Place front left log (BD16). Use log’s 

bottom notch to locate it onto the front 
support and just rest on top of the 
burner housing assembly.

3.  Place front right log (BD17). Use log’s 

bottom notch to locate it onto the front 
support and just rest on top of the 
burner housing assembly.

4.  Place ember material on top of burner.
5.  Scatter the ember material over the 

tiles on the front area of the burner 
housing. (Fig. 40) Do not pack the 
ember material. Separate it when 
unpacked and keep it in  a fluffy and 
loose condition for a more realistic 
ember effect.

6.  Place front center log (B138) on top of 

the two small shelves at the front log 
support, and between the left and right 
logs.

7.  Place top center log (BD18) on top of 

the rear log using the hole locator under the log and 
on top of front right log.

8.  Scatter lava rock material round the firebox base.

�����
����������
�����

Rear

(BD15)

Top Center

(BBD18)

Front Right

(BD17)

Front 

Left

(BD16)

Lava Rock

Front Center 

(B138)

Ember Material

Lava 

Rock

LG434

Fig. 40  Correct log placement for 43LDVT.

RN/RP & EN/EP Models
For units equipped with ‘HI/LO’ valves the flame 
adjustment is accomplished by rotating the ‘HI/LO’ 
adjustments knob located near the center of the gas 
control valve.  (Fig. 41-42)

It is important to periodically perform a visual check of 
the pilot and burner flames. Compare them to Figures 
43 and 44.
If the flame patterns appear abnormal contact a 
qualified service provider for service and adjustment.

��

��

Turn

counterclockwise

to decrease

flame height

Turn clockwise

to increase

flame height

HV102

Honeywell hi/lo knob

4/5/99   djt

Fig. 41  Flame adjustment knob for Honeywell valve.

FP390

FLAME ADJUSTMENT KNOB

11/21/96

Turn 

counterclockwise

to increase

flame height

Turn clockwise

to decrease

flame height

Fig. 42  Flame adjustment knob for SIT valve.

������
����������������
����

FP1541

Fig. 43  Correct pilot flame appearance.