Greenheck Fan GGH20 Manual De Usuario

18

Timer Programming –  

24 Hour / 7 Day

Setting the Clock

1.  Press and hold the CLOCK button.
2.  Press and hold the DAY button until the display 

shows the current day.

3.  Press the HOUR button until the display shows the 

current hour.

4.  Press the MIN (minute) button until the display 

shows the current minute.

Setting the Programs

1.  Press the PROG (program) button once. You will 

now set the time in which you want the wash to 
start. The number 1 in the lower left hand corner 
indicates that you are now programming Event 1.

2.  Press the DAY button repeatedly until the display 

shows the day(s) when you want the timer to turn 
on. The options are:

    - Days of the week

    MO, TU, WE, TH, FR, SA, SU

    - Individual days of the week

    MO etc.

    - Weekdays only

    MO, TU, WE, TH, FR

    - Weekends only

    SA, SU

3.  Press the HOUR and MIN (minute) buttons to set 

the time when you want the timer to turn on. 

4.  Press the PROG (program) button again.
5.  Repeat steps 2-4 to set the OFF time for Event 1. 

This should be set one minute after the ON time.

6.  When programming is complete, press the CLOCK 

button to display the current time.

Things you should know about programming events: 

•  You can repeat the ON and OFF programming 

procedures outlined above for up to seven (7) 
events as needed.

NOTE

While setting events, the timer may prematurely turn 
on the load, if you press the MODE button.  

  •  Three kinds of settings can cause the timer to 

work in an unexpected way:

 

a.  Set up events in progressive order of time, for 

example:

 

 

8:00 pm ON, 9:00 pm ON, 10:00 pm ON 

 

Not 8:00 pm ON, 10:00 pm ON, 9:00 pm ON

 

b.  Do not overlap event times, for example:

 

 

 8:00 pm ON / 12:00 pm OFF and  
9:00 pm ON / 11:00 pm OFF

 

c. Set the OFF time for one minute after the ON 
time.

Reviewing Events Programmed

In your current time display, press the PROG (program) 
button repeatedly to check your settings.
When finished, press the CLOCK button to return the 
display to the time of day.

Clearing (Deleting an Event)

1.  Press the PROG (program) button as many times 

as necessary to locate the setting you want to 
clear.

2.  Press and hold the MODE button.
3.  Press the PROG button to clear the setting.
4.  When finished, press the CLOCK button to return 

the display to the time of day.

Operating the Time Switch

Press the MODE button repeatedly to set the timer to 
Automatic, Random or Manual mode.

NOTE

For the time switch to run programmed events, it 
must be set to AUTO mode.

•  AUTO runs all events automatically according to the 

schedule you have set. The word AUTO appears in 
the display. 

•  RND (random) runs all events in a RANDOM mode. 

This is a security feature in which ON and OFF 
times randomly differ +/- 15 minutes from the 
programmed times, creating a more “lived-in” look. 
The word RND appears on the display. 

NOTE

Do NOT set this timer to RND mode. It will not wash 
at the exact time you programmed.

•  MANUAL turns ON and OFF only when the user 

presses the ON or OFF button. The display is blank, 
showing neither RND or AUTO.

Overriding Timer Settings

The ON or OFF buttons override the current 
programmed events. To override the current program 
(either ON or OFF), press the ON or OFF button.