Zephyr AK8100AS Manual De Usuario
Maintenance –
Cleaning and Installing Filters
12
www.zephyronline.com
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/
scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.
For heavier soil use liquid degreaser.
scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and
grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.
grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.
Metal Mesh and Decorative Mesh Filters
The filters are intended to trap residue and grease from cooking. Although the fi lters should never need replacing, they are
required to be cleaned every 30 days or more often depending on cooking habits.
required to be cleaned every 30 days or more often depending on cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry fi lters and re-install before using hood.
Installing Metal Mesh Filter, FIG 5:
1. Place back of fi lter into channel on left side of Power Pack.
2. Push fi lter handle in towards left side of Power Pack.
3. Pivot fi lter up and lock into place.
Hood Model:
Part No.
Qty. to Order
AK8000AS 50200022 1
Installing Decorative Mesh Filter, FIG 6:
Hood Model:
Part No.
Qty. to Order
AK8100AS 50200024 1
1. Place back of fi lter into channel on left side of Power Pack.
2. Pull fi lter handle down.
3. Pivot fi lter up and lock into place.
3
FIG 5
FIG 6
2
1
1
2
3