Yamaha HTR-5790 Manual De Usuario

■

Connect one or two speaker systems to these terminals. If 
you use only one speaker system, connect it to either the 
FRONT A or B terminals.

The Canada model cannot output to two separate speaker systems 
simultaneously.

The unit also allows you to make bi-wired connections to 
one speaker system. Use two pairs of speaker cables fo

r 

each speaker (one pair for the woofer and one pair for the tweeter/

mid-range). To use the bi-wired connections, press 

SPEAKERS 

A

 and 

SPEAKERS B

 on the front panel so that both 

SP A

 and 

B

 light up on the front panel display.

■

Connect a center speaker to these terminals.

■

Connect surround speakers to these terminals.

■

Connect a subwoofer with built-in amplifier, such as the 
YAMAHA Active Servo Processing Subwoofer System, 
to this jack.

■

Connect surround back speakers to these terminals. If you 
only connect one surround back speaker, connect it to the 
left (L) terminals. 

■

Connect presence speakers to these terminals.

*

If you are using either U.S.A., Canada or Australia model, you 
can also use these speakers as Zone 2 speakers (see page 57).

R

L

00_HTR-5790U_EN.book  Page 14  Tuesday, December 9, 2003  9:16 AM