Yamaha HTR-5790 Manual De Usuario

You can use the test tone feature to manually balance your 
speaker levels. Please note that this operation will override 
the level adjustments made in “AUTO SETUP” (page 24), 
“Speaker level” (page 50) and “Manually adjusting 
speaker levels” (page 45). Use the test tone to set speaker 
levels so that the volume from each speaker is identical 
when heard from your listening position.

y

• Use a handheld SPL meter, hold at arms length and point 

upwards so that the meter is in the listening position. With the 
meter set to the 70 dB scale and to C SLOW, calibrate each 
speaker to 75 dB.

• Before outputting the test tone, we recommend that you set the 

output volume to 0 dB.

You cannot enter test mode if headphones are connected to the 
PHONES jack. Remove the headphones from the PHONES jack.

The unit will output a test tone.

TEST LEFT

Front left speaker

TEST CENTER

Center speaker

TEST RIGHT

Front right speaker

TEST R SUR.

Right surround speaker

TEST R SUR. B

Right surround back speaker

TEST L SUR. B

Left surround back speaker

TEST L SUR.

Left surround speaker

TEST SUBWOOFER

Subwoofer

u

d

j

i

The test tone stops.

If PRESENCE is set to YES, press TEST twice to stop the test 
tone.

The unit will output a test tone.

TEST FRONT

Front speakers

TEST PRESENCE

Presence speakers

TEST PRES L

Presence left speaker

TEST PRES R

Presence right speaker

u

d

 j

i

The test tone stops.

00_HTR-5790U_EN.book  Page 46  Tuesday, December 9, 2003  9:16 AM