Yamaha HTR-5790 Manual De Usuario

In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and 
other manufacturers. To control other components, you must set up remote control with the appropriate manufacturer 
codes.

This remote control also has a learn feature which allows the remote to acquire functions from other remote controls 
equipped with an infrared remote control transmitter.

■

The shaded areas below can be used to control this unit 
when the AMP mode is selected. Press AMP to select the 
AMP mode.

y

You can set the remote so that the shaded areas always control 
this unit. This is useful, for example, if you always want to use 
the numeric buttons to select this unit’s sound fields instead of for 
controlling the selected component (DVD, CD, MD, etc.). To 
activate this mode, hold down AMP for at least 3 seconds so that 
“A:__” (i.e., “A:DVD”) appears in the display window. To 
cancel, repeat so that only the selected component (i.e., “DVD”) 
is displayed.

■

The shaded areas below can be used to control other 
components. Each button has a different function 
depending on the selected components. Select the 
component you want to control by pressing an input 
selector button or SELECT k/n. The name of the selected 
component appears in the display window.

Input selector buttons

switch the component

control area.

You can control up to 11 
different components by 
setting appropriate 
manufacturer codes (see 
page 64).

00_HTR-5790U_EN.book  Page 59  Tuesday, December 9, 2003  9:16 AM