Yamaha HTR-5790 Manual De Usuario
63
REMOTE CONTROL FEATURES
A
D
V
ANCED
OPERA
T
ION
You can clear all changes made in each function set, such
as learned functions, renamed source names and setup
manufacturer codes.
as learned functions, renamed source names and setup
manufacturer codes.
1
Press CLEAR by using a ballpoint pen or
similar object.
similar object.
y
Complete each of the following steps in 30 seconds. Other
wise, the learning mode will be automatically canceled. In
this case, press CLEAR again.
wise, the learning mode will be automatically canceled. In
this case, press CLEAR again.
2
Press
u
/
d
to select the clear mode.
L:DVD
(L: name of a component)
Clears all learned functions in the respective
component control area. Press an input selector
button to select the component.
Clears all learned functions in the respective
component control area. Press an input selector
button to select the component.
L:AMP
Clears all learned functions for this unit’s control
area.
area.
L:ALL
Clears all learned functions.
RNAME
Clears all renamed source names.
FCTRY
Clears all remote functions and returns the remote
to the factory settings.
to the factory settings.
3
Press and hold CLEAR again for about 3
seconds.
seconds.
“C:OK” appears in the display window.
“C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
unsuccessful. In this case, start over from step 2.
4
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function for a
button, the button reverts to the factory setting.
button, the button reverts to the factory setting.
“ERROR” appears in the display window under the following
circumstances:
circumstances:
– When a button other than the cursor is pressed.
– When more than one button is pressed at once.
– When more than one button is pressed at once.
■
Clearing a learned function
You can clear the function learned in a certain
programmed button in each area.
programmed button in each area.
1
Press an input selector button to select the
source component containing the function
you want to clear.
source component containing the function
you want to clear.
The selected component name appears in the display
window.
window.
2
Press LEARN using a ballpoint pen or similar
object.
object.
“LEARN” and the selected component name appear
alternately in the display window.
alternately in the display window.
y
Complete each of the following steps in 30 seconds.
Otherwise the learning mode will be automatically canceled.
In this case, press LEARN again.
Otherwise the learning mode will be automatically canceled.
In this case, press LEARN again.
3
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
or similar object, then press the button you
want to clear for about 3 seconds.
“C:OK” appears in the display window.
When you clear a learned function, the button reverts
to the factory setting (or to the manufacturer setting if
you have set manufacturer codes).
to the factory setting (or to the manufacturer setting if
you have set manufacturer codes).
4
Repeat step 3 to clear other learned
functions.
functions.
5
Press LEARN again to exit.
Clearing function sets
Note
Note
CLEAR
CLEAR
CLEAR
Clearing individual functions
TUNER
PHONO
V-AUX
DTV
DVR/VCR2
VCR 1
DVD
CBL/SAT
MD/TAPE
CD-R
CD
MULTI CH IN
LEARN
PHONO
POWER
SLEEP
CLEAR
LEARN
STANDBY
TRANSMIT
RE–NAME
INPUT MODE
SYSTEM
V-AUX
DTV
DVR/VCR2
VCR 1
DVD
CBL/SAT
MD/TAPE
CD-R
TUNER
MULTI CH IN
CD
00_HTR-5790U_EN.book Page 63 Tuesday, December 9, 2003 9:16 AM