National Instruments 321518A-01 Manual De Usuario
Chapter 8
VirtualBench-AODC
Getting Started with VirtualBench
8-2
©
National Instruments Corporation
Controlling Analog Output
You can start controlling analog output with VirtualBench-AODC by
following these steps:
following these steps:
1.
Configure VirtualBench-AODC.
a.
Select Settings from the Edit menu on the front panel.
b.
Click on the General tab in the AODC Settings dialog box.
c.
Select the Device and SCXI Module that you want to use. The
SCXI Module list is disabled if no SCXI modules are
configured for the selected device. The device must be
successfully configured in the NI-DAQ Configuration Utility
to appear in this list.
SCXI Module list is disabled if no SCXI modules are
configured for the selected device. The device must be
successfully configured in the NI-DAQ Configuration Utility
to appear in this list.
06Chap08.fm Page 2 Friday, February 28, 1997 3:23 PM