National Instruments NI PXI/PCI-5114 Manual De Usuario

Unless otherwise noted, the following conditions were used for each 
specification:

•

All filter settings

•

All impedance selections

•

Sample clock set to 250 MS/s

Typical values are representative of an average unit operating at room 
temperature. Specifications are subject to change without notice. For the 
most recent NI 5114 specifications, visit 

ni.com/manuals

.

To access the NI 5114 documentation, including the NI High-Speed 
Digitizers Getting Started Guide, which contains functional descriptions of 
the NI 5114 signals, navigate to Start»Programs»National Instruments»

 

NI-SCOPE»Documentation.

 If the NI 5114 has been in use, it may exceed safe handling temperatures and 

cause burns. Allow the NI 5114 to cool before removing it from the PXI chassis.

Sample Clock ................................................................................... 6
Phase-Locked Loop (PLL) Reference Clock................................... 7
CLK IN (Sample Clock and Reference Clock Input,

Reference (Stop) Trigger ................................................................. 8
TRIG (External Trigger, Front Panel Connector)............................ 10

TClk Specifications................................................................................. 12
Waveform Specifications ........................................................................ 13
Calibration............................................................................................... 14