Audio-Technica AT-LP120-USB Manual De Usuario

English

Main Features

Figure 1

1. POWeR DIAL

Controls power to the unit.

2. START/STOP BUTTOn

engages and disengages the motor/platter.

3. PLATTeR SPeeD BUTTOnS

Select 33 or 45 RPM platter speed. (note: 78 RPM is selected by

pressing the 33 and 45 buttons simultaneously.)

4. PLATTeR

Cast aluminum platter mounts directly to center

spindle/motor shaft.

5. STROBe DOTS (On platter edge)

Operate in conjunction with stroboscopic light located under

power dial (1) to provide visual indication of accurate platter speeds.

6. CenTeR SPInDLe

Precision-machined platter mount on motor shaft.

7. 45-RPM ADAPTeR (Shown in receptacle)

Adapts 7" records with large center holes to fit center spindle.

8. DUST COVeR HInGe HOLDeRS

Attachment points for removable hinged dust cover.

9. HeADSHeLL ReCePTACLe

Storage receptacle for extra headshell (not included).

10. TOne ARM ASSeMBLY

Refer to Figure 2 on page 4 for details.

11. DIReCTIOn BUTTOn

Controls platter’s rotational direction:

F – Forward (clockwise)

R – Reverse (counter-clockwise)

12. PITCH ADJUST SLIDe COnTROL

Use in conjunction with pitch button (15) to vary the platter’s

rotational speed. In the center detent position quartz lock is active.

13. PITCH SeLeCTIOn InDICATOR

Shows Green for standard or locked RPM setting, or Red for a

pitch-adjusted setting.

14. QUARTZ SPeeD LOCK

Toggles between internal quartz-locked reference and variable

pitch controlled by pitch adjust slide control (12).

15. PITCH BUTTOn

Selects the range of pitch variation permitted by the pitch adjust

slide control (12). (See page 7 for information on locking or

adjusting platter speed.)

16. POPUP STYLUS TARGeT LIGHT

Provides illumination directed at the stylus position for easier

cueing in poor light.

17. VOLTAGe SeLeCTOR SWITCH

(Access through holes in platter)

Selects operating voltage (115V or 230V AC, 60/50 Hz).