National Instruments 1141 Manual De Usuario
Appendix B
Removing the SCXI-1141/1142/1143 Module
B-2
ni.com
2.
If the SCXI-1141/1142/1143 is the module cabled to the E/M Series
DAQ device, disconnect the cable.
DAQ device, disconnect the cable.
3.
Remove any terminal block that connects to the
SCXI-1141/1142/1143.
SCXI-1141/1142/1143.
4.
Rotate the thumbscrews that secure the SCXI-1141/1142/1143 to the
chassis counterclockwise until they are loose, but do not completely
remove the thumbscrews.
chassis counterclockwise until they are loose, but do not completely
remove the thumbscrews.
5.
Remove the SCXI-1141/1142/1143 by pulling steadily on both
thumbscrews until the module slides completely out.
thumbscrews until the module slides completely out.
Figure B-1. Removing the SCXI-1141/1142/1143 Module
1
Cable
2
SCXI Module Thumbscrews
3
SCXI-1141/1142/1143 Module
4
Terminal Block
5
SCXI Chassis Power Switch
6
SCXI Chassis
®
SC
XI
11
00
2
3
4
5
6
1