Black Box VX-HDMI-IP-MRX Manual De Usuario
724-746-5500 | blackbox.com
Page 29
Chapter 5: Advanced Commands
For both transmitter and receiver units, the added RJ-11 to DB9 serial cable needs to
be connected to the second serial port on the devices.
be connected to the second serial port on the devices.
5.4 Telnet Extension
Telnet serial extension allows for serial output from a receiver through a Telnet
connection. This disables serial input coming from a transmitter but allows for 2-way
communication to specific devices.
NOTE: Telnet extension requires custom firmware. For details, contact Black Box
connection. This disables serial input coming from a transmitter but allows for 2-way
communication to specific devices.
NOTE: Telnet extension requires custom firmware. For details, contact Black Box
Technical Support at 724-746-5500 or info@blackbox.com.
To set up a Telnet extension:
1. Using a Telnet protocol, use Port 6752.
1. Using a Telnet protocol, use Port 6752.
Figure 5-5. Setting up Telnet extension using a Telnet protocol.