Maxtor SATA II/300 Manual De Usuario

 

PAGE 1

Warranty Registration Information

 

Before installing the hard drive, please write down the serial number and the model number information. If you 
ever need to contact Maxtor Support, you must provide this information about your hard drive prior to 
assistance.

Several hard drive models are illustrated below to help you identify where these numbers are located. Use the 
drawing that looks like your hard drive, then locate the model and serial numbers from your hard drive and 
write these numbers in the space provided.

Limit to 1.5 Gb/s Operation
3 Gb/s Operation

S/N: XXXXXXXX

XXXXXXXXXX

P/N: XXXXXX-XXX

Firmware: X.XXX

Date Code: XXXXX   Site Code: XX

Caution. Product warranty is void if any seal
or label is removed, or if the drive experiences 
shock in excess of 350 Gs.

+5V  x.xx A

+12V x.xx A

D33027

For technical support and regional contact 
information, please visit www.maxtor.com

R

E106814

1. Attach the cables. The data interface and power cables are keyed. 
2. Mount the drive using two screws per side. Do not over tighten the screws.
3. Serial ATA controllers or systems may have custom device drivers. See your 
    controller or system documentation for specific installation instructions.
4. Prepare the drive for use with your Operating System. See your OS instructions 
    for details. Be careful to select the correct drive. Always backup critical data 
    before making changes. Windows  XP  or 2000 prepares the drive during 
    installation. Windows  ME or 98 uses FDISK and Format commands.

®

®

For easy installation use MaxBlast software, available at www.maxtor.com.

*One Gbyte equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.

Serial 
Number

Model 
Number

Serial 
Number

Model 
Number

Serial 
Number

Model 
Number