Schneider Electric 58 TRX Manual De Usuario
Class 8839 58M Enclosed AC Drives
Standard Modifications
151
09/2003
©
2000–2003 Schneider Electric All Rights Reserved
OPERATOR CONTROL DEVICE OPTIONS
These door-mounted operator controls provide digital and analog inputs for commanding drive speed
and start/stop functions. The digital and analog input terminals are active only when the keypad is
programmed for the Terminal Mode of operation.
and start/stop functions. The digital and analog input terminals are active only when the keypad is
programmed for the Terminal Mode of operation.
Mod
A07
A07
Hand-Off-Auto selector switch with manual speed potentiometer
Provides a door-mounted three-position selector switch and manual speed potentiometer. The Hand-Off-Auto selector
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor and is also used
to reset drive controller faults.
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor and is also used
to reset drive controller faults.
Mod
B07
B07
Hand-Off-Auto selector switch Start/Stop push buttons and manual speed potentiometer
Provides a door-mounted three-position selector switch and manual speed potentiometer. The Hand-Off-Auto selector
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. In the Hand position, Start/Stop pushbuttons are
used to start and stop the motor using a three-wire control strategy. The Off position stops the motor and is also used
to reset drive controller faults.
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. In the Hand position, Start/Stop pushbuttons are
used to start and stop the motor using a three-wire control strategy. The Off position stops the motor and is also used
to reset drive controller faults.
Mod
C07
C07
Start/Stop push buttons with manual speed potentiometer
Provides Start/Stop pushbuttons to start and stop the motor using a three-wire control strategy. The speed is adjusted
by a door-mounted manual speed potentiometer. The drive disconnect is used to reset drive controller faults unless
the Fault Reset (option P10) is ordered.
by a door-mounted manual speed potentiometer. The drive disconnect is used to reset drive controller faults unless
the Fault Reset (option P10) is ordered.
Mod
D07
D07
Start/Stop push buttons, Forward-Reverse selector switch with manual speed potentiometer
Provides Start/Stop pushbuttons to start and stop the motor using a three-wire control strategy. The speed is adjusted
by a door-mounted manual speed potentiometer. Motor direction is controlled with a forward-reverse selector switch.
The drive disconnect is used to reset drive controller faults unless the Fault Reset option (option P10) is ordered.
by a door-mounted manual speed potentiometer. Motor direction is controlled with a forward-reverse selector switch.
The drive disconnect is used to reset drive controller faults unless the Fault Reset option (option P10) is ordered.
Mod
E07
E07
Hand-Off-Auto selector, Local-Remote selector switch with manual speed potentiometer
Provides a door-mounted three-position selector switch and manual speed potentiometer. The Hand-Off-Auto selector
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor and is also used
to reset drive controller faults.
switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor may be started and
stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal to analog input
reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor and is also used
to reset drive controller faults.
Mod
F07
F07
Communication-Auto-Off-Hand selector switch with manual speed potentiometer
Provides a door-mounted four-position selector switch and manual speed potentiometer door. The Communication-
Auto-Off-Hand selector switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor
may be started and stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal
to analog input reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor
and is also used to reset drive controller faults. In Communication position, control is by serial communication to a
communication card.
Auto-Off-Hand selector switch is used to select between the AI1 and AI2 analog inputs. In the Auto position, the motor
may be started and stopped by a user-supplied remote contact. The speed may be adjusted by a 4–20 mAdc signal
to analog input reference AI2 or with the door-mounted manual speed potentiometer. The Off position stops the motor
and is also used to reset drive controller faults. In Communication position, control is by serial communication to a
communication card.