Toshiba SD-M1612 Manual De Usuario

5 

Audio Cable (optional) - If you have a sound card and 
speakers, and would like to play audio CDs on your 
computer, you will need to install a CD/DVD audio cable. 
Toshiba's DVD-ROM drives use a standard 4-pin audio 
cable that can be purchased from most local computer 
suppliers. The sound cable connects to your sound card 
at one end and the other end connects to the digital 
audio connector at the left rear of the DVD-ROM drive 
(see DVD-ROM drive Back Panel

 

photo for location). 

Refer to the instructions that came with your sound card 
for details on any sound-driver software required

.

 

 

 
After you have connected all the necessary cables, 
push the DVD-ROM drive completely into the 
computers drive slot. Mount drive per your computers 
instructions. The screw length should not exceed 
30.5mm (measured from outside surface of side or 
bottom of drive to tip of screw). Replace computer 
cover and all outer screws. 
 

 

 
Figure 6.Mounting Illustration

 

 

 

Software Driver - Toshiba's optical drives do not require any unique device drivers for Windows 
'95/'98/2000/Me/XP/NT. After installing your drive and re-booting, your system should recognize your 
drive. Windows '95/'98/2000/Me/XP/NT Operating Systems support all Toshiba optical drives natively If 
you prefer using DOS, download the DOS ATAPI driver from our web site.