HP (Hewlett-Packard) 3800ux Manual De Usuario

Navigation

39

Changing the current SCSI IDs

READY > ADMIN* > SCSI IDS >

To change the SCSI IDs:

1. Follow the instruction in “

” on page 37 until the 

list of SCSI IDs is displayed.

2. Press NEXT until the setting you want to change displays, and then press 

ENTER. The ID begins flashing.

3. Press NEXT or PREV until the new ID that you want displays and then press 

ENTER. 

4. Repeat 

 and 

 until you have changed all the IDs that need to be 

updated. 

5. Press NEXT until 

UPDATE

 displays, and then press ENTER.

6.

UPDATE

 or 

WAIT FOR UPDATE 

and then 

IDS SAVED

 displays briefly.

—  If the new settings do not conflict with other SCSI IDs on the bus, 

SCSI 

IDS

 displays. 

— If the new settings conflict with other IDs on the SCSI bus, 

CONFLICT-ABORTED

 displays briefly and then 

VIEW IDS

 displays. 

Any changes entered are lost, and you must repeat the above steps to set a 
new ID.

7. Press CANCEL until 

READY

 displays.

8. Power off the jukebox and then power it back on to save the IDs to the 

jukebox flash ROM.

Note:  

UDO drives accept addresses from 0 to 15. The jukebox and MO drives (in a 

mixed-media unit) accept addresses from 0 to 7. 

Configuring the jukebox

You can set configurations to customize the way the jukebox operates. 

 

lists the jukebox configuration options.