StarTech.com SAT2510BU2E Manual De Usuario
4
Fasten the front panel (with drive attached) to the rear panel
4.
(enclosure), using the screws removed in step #1.
To connect the hard drive enclosure to a host computer using USB,
5.
simply insert the included USB cable into the USB type Mini B slot
provided by the enclosure, and the remaining end into an available
USB type A slot on the host computer.
To connect the hard drive enclosure to a host computer using
provided by the enclosure, and the remaining end into an available
USB type A slot on the host computer.
To connect the hard drive enclosure to a host computer using
6.
eSATA, simply plug the included eSATA cable from the enclosure to
the host computer. To provide power to the enclosure, connect the
USB to DC cable (provided) to an available USB port on the host
computer, and insert the remaining end into the power port located
on the hard drive enclosure.
the host computer. To provide power to the enclosure, connect the
USB to DC cable (provided) to an available USB port on the host
computer, and insert the remaining end into the power port located
on the hard drive enclosure.
Driver Installation
Windows 2000/XP/Server 2003/Vista, Mac OS X, Linux
No driver installation is required for these operating systems, as this
enclosure is natively supported, so the drivers are already installed.
No driver installation is required for these operating systems, as this
enclosure is natively supported, so the drivers are already installed.