Maytag W10359302A Hoja De Datos

IMPORTANT: This refrigerator is designed for indoor household 
use only.

To ensure proper ventilation for your refrigerator, allow for ½" 
(1.25 cm) of space on each side and at the top. Allow for 1" 
(2.54 cm) of space behind the refrigerator. If your refrigerator has 
an ice maker, allow extra space at the back for the water line 
connections. When installing your refrigerator next to a fixed wall, 
leave a 2" (5.08 cm) minimum space on the hinge side (some 
models require more) to allow the door to swing open. 

NOTE: This refrigerator is intended for use in a location where the 
temperature ranges from a minimum of 55°F (13°C) to a 
maximum of 110°F (43°C). The preferred room temperature range 
for optimum performance, which reduces electricity usage and 
provides superior cooling, is between 60°F (15°C) and 90°F 
(32°C). It is recommended that you do not install the refrigerator 
near a heat source, such as an oven or radiator.

Before you move your refrigerator into its final location, it is 
important to make sure you have the proper electrical 
connection.

A 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded 
electrical supply is required. It is recommended that a separate 
circuit serving only your refrigerator be provided. Use an outlet 
that cannot be turned off by a switch. Do not use an 
extension cord.

NOTE: Before performing any type of installation or cleaning, or 
removing a light bulb, turn cooling off or turn the control 
(Thermostat, Refrigerator or Freezer Control depending on the 
model) to OFF, and then disconnect the refrigerator from the 
electrical source. When you are finished, reconnect the 
refrigerator to the electrical source and turn cooling on or reset 
the control (Thermostat, Refrigerator or Freezer Control 
depending on the model) to the desired setting. See “Using the 
Controls” in the User Instructions, User Guide, or Use & Care 
Guide.