Maytag W10359302A Hoja De Datos

4. Slide the handle upward to release it from the keyhole slot 

and pull the handle away from the door. 

5. Remove the decal covering the hole on the opposite side of 

the door, where the refrigerator door handle will be installed, 
and discard the decal.

6. Remove the shoulder screw from the left-hand side of the 

door and fasten it into the hole in the door that was behind 
the decal.

7. Align the keyhole slot in the handle mounting bracket with the 

shoulder screw. Position the handle so that the mounting 
base is flush against the door. Slide the handle downward 
until it locks into place.  

8. Fasten the top of the refrigerator handle to the top of the 

refrigerator door. 

9. Cover the remaining hole with the decal (provided).    

10. Tighten all screws. Set aside refrigerator door until bottom 

hinge is installed on the opposite side of the refrigerator.

NOTE: For 21 cu ft models, transfer both the bottom hinge 
assembly and the leveling foot to the opposite side. 

1. Remove the screw attaching the hinge pin to the hinge. Turn 

the hinge over so that it is pointing in the opposite direction.

2. Place the plastic spacer beneath the hinge so that it will be 

between the hinge and the cabinet, making sure the holes are 
aligned. 

3. Fasten the Top Hinge to the opposite side of the cabinet, 

inserting the screws only halfway, so you will be able to 
replace and align the freezer door later.

A

B

A

B

⁵⁄₁₆

A

A

B

C

A

B

C

A

B

C