Whirlpool SF360PEE Manual De Usuario
22
USING THE SELF-CLEANING CYCLE
S
ETTING
THE
CONTROLS
1.
Press the auto clean pad.
The clean indicator light will light up.
This will automatically set a 4
1
⁄
2
-hour
Self-Cleaning cycle.
NOTE:
There will be a 30-minute cool-down
1
⁄
2
hour before the cycle is over.
2.
Start the oven.
NOTE:
The on indicator light will light up and the
close door indicator light will flash if the door is
not closed.
not closed.
3.
After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks. The door cannot be opened
when the door locked indicator light is on.
the oven door locks. The door cannot be opened
when the door locked indicator light is on.
4.
After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out.
will go out.
Press the off/cancel pad to clear the display.
5.
After the oven cools to room temperature, wipe
off any residue or ash
with a damp cloth or
sponge. If needed,
touch up spots with a
mild abrasive cleanser
or cleaning sponge.
with a damp cloth or
sponge. If needed,
touch up spots with a
mild abrasive cleanser
or cleaning sponge.
S
ETTING
THE
CONTROLS
AUTO
CLEAN
ON
PRESS
YOU SEE
PRESS
YOU SEE
ON
YOU SEE
ON
YOU SEE
ON
START
5 SEC
ENTER
PRESS
OFF
CANCEL