Lexmark C762 Manual De Usuario
PJL
3-48
Common Variables for PCL Emulation
Note:
The word
common
applies to those variables common to both your printer
and the Hewlett-Packard Company’s LaserJet printers.
Use these variables only for PCL emulation. The
[command modifier:value]
parameter should be specified as
LPARM
:
PCL
. For example:
@PJL SET LPARM:PCL FONTSOURCE=I<CR><LF>
To determine which variables your printer supports, see “Table B-3: Common
Variables for PCL Emulation” on page B-11.
Variables for PCL Emulation” on page B-11.
Table 3-5: Common Variables for PCL Emulation
Variable
Function
Selections
Factory Default
FONTNUMBER
Font Number
0, 1, .... n
0
FONTSOURCE
Font Source
I, S, M1, M2, M3, M4, D1
I
Internal font source
S
Permanent download fonts
M1, M2,
M3, M4
M3, M4
Flash font source
D1
Disk font source
All other values default to internal font source.
I
PITCH
Default pitch
(fixed-pitch fonts)
(fixed-pitch fonts)
0.08 to 100 (in increments of 0.01)
Note:
If an invalid pitch is requested, the printer
selects the closest pitch.
10.00
PTSIZE
Default point size
(proportional spaced
fonts)
(proportional spaced
fonts)
1 to 1008 (in increments of 0.25)
Note:
If an invalid point size is requested, the
printer selects the closest point size.
12.00
SYMSET
Symbol set for the
default font
default font
If a symbol set is requested that is not resident
in the printer, the symbol set is not changed.
in the printer, the symbol set is not changed.
PC8, PC850
(Country specific)
(Country specific)