KitchenAid KDRS462 Manual De Usuario

Descargar
Página de 64
11
Burner cap: Always keep the burner cap in place when using a 
surface burner. A clean burner cap will help avoid poor ignition 
and uneven flames. Always clean the burner cap after a spillover 
and routinely remove and clean the caps according to the 
“General Cleaning” section.
Gas opening: Gas must flow freely throughout the gas opening 
for the burner to light properly. Keep this area free of soil and do 
not allow spills, food, cleaning agents or any other material to 
enter the gas opening. Keep spillovers out of the gas opening by 
always using a burner cap.
Burner ports: Check burner flames occasionally for proper size 
and shape as shown above. A good flame is blue in color, not 
yellow. Keep this area free of soil and do not allow spills, food, 
cleaning agents or any other material to enter the burner ports.
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Do not use oven cleaners, bleach 
or rust removers.
1. Remove the burner cap and burner head (15,000 and 
5,000 Btu/h burners) from the burner base and clean 
according to “General Cleaning” section.
2. Clean the gas opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do 
not enlarge or distort the port. Do not use a wooden 
toothpick. If the burner needs to be adjusted, contact a 
trained repair specialist.
4. Replace the burner cap, making sure the alignment pins are 
properly aligned with the burner cap.
5. Turn on the burner. If the burner does not light, check cap 
alignment. If the burner still does not light, do not service the 
sealed burner yourself. Contact a trained repair specialist.
Even-Heat™ Grill 
(on some models)
     
The grill module consists of a cast-iron grate, a wave tray, a flame 
spreader, a burner assembly, 2 grease trays and a drip tray. It is 
used to grill foods. Refer to the “Grill Chart” for cook times and 
settings.
When using the grill, follow the guidelines below.
Trim excess fat to reduce spattering. Slit the remaining fat on 
the edges to avoid curling.
Allow space between food on the grill. Crowding food will 
result in uneven cooking.
Use a metal spatula or tongs to turn food.
Steaks, chops and hamburgers should be turned only once 
to avoid loss of juices.
For even cooking, foods such as chicken quarters should be 
turned several times.
To check for doneness of meats and poultry, use an instant 
read thermometer or make a small cut in the center of the 
food. This will avoid loss of juices.
A. 1-1
¹⁄₂" (25-38 mm)
B. Burner ports
     20,000 Btu/h Ultra Power™ Dual-Flame 
Burner
A. Incorrect
B. Correct
   15,000 Btu/h Professional Burner
A. Incorrect
B. Correct
A
B
A
B
A
B
  5,000 Btu/h Simmer/Melt Burner
A. Incorrect
B. Correct
A. Grill grate
B. Wave tray
C. Burner assembly
D. Flame spreader
E. Grease trays
F. Drip tray
A
B
A
B
C
D
E
F