Craftsman 486.242241 Manual De Usuario

5

(1) Hammer
(2) 1/2" Wrenches
(2) 7/16" Wrenches

•  Each brush assembly has one brush retainer marked

with either red or black ink. Lay out the brush assemblies
as shown so that the brush retainers marked with ink
are in the middle with the black one on your right and
the red one on your left. See figure 1.

IMPORTANT: The overlap bristles at the bottom of each
brush  help  support  the  back  side  of  the  brush  for  better
sweeper performance. Be sure the sweeper is turned as 
shown in figure 2 to correctly assemble the brushes.

•  Attach the brush assembly with the black brush retainer

to the right end of the brush shaft using two hex bolts
(D) and nylock nuts (H). The brush retainer marked with
black ink must be placed to the

middle of the sweeper. 

See figure 2.

•  To protect painted parts, lay them on cardboard or a

mat.

•  Remove the sweeper housing, the loose parts and the

hardware package from the carton. Lay out the parts
and hardware as shown on pages 3 and 4.

•  Place the sheet of cardboard from inside the carton onto

your work surface to prevent scratching the sweeper.