Standard Horizon Gx5500s Manual De Usuario

GX5500S

Page 44

The GX5500S has the capability to turn off the Individual call ringer.

1. Press and hold down the [CALL(MENU)] key

until “

Radio Setup

Radio Setup” menu appears.

2. Turn the CHANNEL selector knob to select

“

DSC Setup

DSC Setup” menu.

3. Press the [ENT] key, then select “

DSC Beep

DSC Beep”

with the CHANNEL selector knob.

4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “

In-

dividual

dividual” if you wish to disable the Individual Call
ringer, or “

Group

Group” if you wish to disable the

Group Call ringer and press the [ENT] key.

6. Turn the CHANNEL selector knob to select

“

Off

Off.”

7. Press the [ENT] key to store the selected set-

ting.

8. Press the [CLR] key twice to return to the “

Radio Setup

Radio Setup” menu, then press

the [CLR] key again to return to radio operation.

To enable the individual ringer tone, repeat the above procedure, turning the
CHANNEL selector knob to select “

On” in step “6” above.

11.5.4 Transmitting an Individual Call

This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.

Pre-Programmable Calling
1. Press the [CALL(MENU)] key. The “

DSC Call

Menu” will appear.

2. Turn the CHANNEL selector knob to select “

In-

dividual

dividual.” (To cancel, press the [CLR] key.)

3. Press the [ENT] key. The transceiver will beep,

and the “Individual directory” will appear.

4. Turn the CHANNEL selector knob to select the

“Individual” you want to contact.

5. Press the [ENT] key, then turn the CHANNEL

selector knob to select the operating channel
you want to communicate on and press the
[ENT] key.

6. Press the [ENT] key again to transmit the individual

DSC signal.